Skip to content
Branch Management Tree Care
The newest addition to the arsenal

Meet the Merlo.

The only one of its kind working trees in Central Florida

The Merlo Roto 50.35 S Plus E4 CVTRONIC is a 360° rotating telehandler that reaches 112 ft and lifts 11,000 lb. Paired with a grapple saw, it’s one of the most capable tree-removal machines anywhere — and right now, Mike is the only arborist in Central Florida putting one to work on trees. It’s the reason we can take down trees that stop other companies cold.

Merlo Roto 50.35 rotating telehandler on a Branch Management Tree Care job site in Central Florida
112 ft
Maximum working height
11,000 lb
Maximum lift capacity
360°
Continuous turret rotation
4WD
All-wheel drive & steer
See it in action

The grapple saw, working.

Watch the Merlo Roto reach up into the canopy, grab a limb, and cut it — all in one controlled motion. The section never free-falls; it’s held the entire way down and set exactly where we want it. That’s the difference between a clean removal and a damaged roof.

Put it to work on your tree
Branch Management’s Merlo Roto telehandler staged at the yard with the boom retracted
Rear view of the Merlo Roto 50.35 showing the 11,000 lb / 112 ft capacity decal
Why it matters for your property

Lift sections out. Don’t drop them.

The difference between a great removal and an expensive mess is control. A rotating telehandler with a grapple saw holds each section while it cuts, then sets it down exactly where we want it — off your roof, away from the pool cage, clear of the flower beds.

  • Reaches over the house and into back yards without heavy ground traffic
  • Continuous 360° rotation places loads precisely
  • Less hand-climbing means a safer job site
  • Faster removals with dramatically less lawn damage
The grapple saw

Grab and cut, in one motion

The Branch Manager attachment clamps a limb and runs a chainsaw bar through it — so heavy sections are never in free-fall over your property.

Merlo telehandler fitted with the Branch Manager grapple saw attachment
Merlo grapple saw attachment raised, ready for a sectional tree removal
Close-up of the Branch Manager grapple saw jaws and chain bar on the Merlo
Detail of the grapple saw cutting head mounted to the Merlo Roto telehandler
The full fleet

More than one machine

The Merlo is the headline, but we bring the right tool for each job — and we own it, so it’s always available and well-maintained.

Our own crane

Owned and operated in-house — not rented. We’ve safely removed thousands of trees with it over four decades. For specialized jobs we add cranes with certified operators.

Aerial bucket lifts

For controlled pruning and removals where climbing or the crane isn’t the right call — reaching high canopy work safely from the basket.

Grapple saw

The Branch Manager grapple saw mounts to the Merlo and grabs a limb while it cuts, so sections are controlled the entire way down — never dropped.

Stump grinders & excavation

Heavy grinders plus the equipment to excavate grindings to grade, so stumps are genuinely removed — not shaved at the surface.

Free, no-pressure estimates

Got a tree the Merlo was built for?

If another company told you it’s too big, too close, or too risky — that’s our specialty. Send a photo and we’ll tell you how we’d take it down.